SIG Control-Line Kits
Active kits shown in BLACK
Active, out-of-stock, kits shown in BLUE
Discontinued kits shown in RED
Never Released kits shown in GRAY
NOTE: Clicking on most pics will bring them up, much enlarged, in another window.
It seems that I must put this statement on each page of the website.
I have NO affiliation
with
SIG Manufacturing Co.
I do not have magical access to kits. I do not have a store that sells kits.
I do not have access to, or sell kit parts. I do not create kits.
I do have a website that shows every kit SIG has ever put out.
You are seeing it now.
As SIG has moved and their website went down for so long, it's been quite a challenge keeping up with their progress.
Their new website shows nothing as far as C/L Aircraft are concerned - not even replacement parts.
I'm keeping the various acft active for now - until we see what the future will bring.
Just for information purposes, many active kits have various spare parts available directly through the SIG website. Each active kit on this page includes links to available parts.
From the SIG Facebook page,
21 March 2019
Skyray XL
The ARF version of this is on hold but a builders kit might happen if there is enough interest.
It is called the Skyray XL. It's a flapless stunter and will do the whole pattern. If you liked the Primary-Force you will like this. 54" span 550 sq/in .32 to .45 engine 40 to 48 oz. laser cut kit
The original 1967 Fantom plan sheet is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
CL-2
P-40 Warhawk Stunter
1953
Designed by: Robert Elliott (Berkeley)
Wingspan - 45"
Engine - .19-.35
I have the original 1952 Berkeley plan sheet by Bob Elliott, available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
CL-3
Chipmunk
1967
(March 1968 - MAN)
Designed by: Jim Van Loo, Modified by Mike Stott, Produced by Maxey Hester
Wingspan - 54.375"
Engine - .35
I have the original Chipmunk plan sheet, and a letter explaining minor mods to improve performance, available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
I have the original SPAD-7 plan sheet, instructions, and an Air Modeler magazine article about the CL-4 & CL-5, available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
I have the original Fokker D-VII plan sheet and instructions, available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
CL-7
P-47N Thunderbolt
1942
by Larry Eisinger of Air Trails for Berkeley
Wingspan - 40.5"
Engine - .29-.45
CL-7
P-47 Thunderbolt
(Original Berkeley Kit)
Wingspan - 32.75"
Engine - .15-.29
SIG bought the rights from Berkeley in 1960 and scaled it up a bit.
I have the original 1942 and 1958 Berkeley plan sheets, available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
CL-8
FW-190
1966
Designed by: Don McGovern
Updated by: Larry Conover
Wingspan - 30"
Engine - .09-.15
The original 1952 Berkeley plan sheet is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
The original Banshee kit plan sheet, along with several other replacement items, is available directly through the SIG website:
SIGKP011 Kit plan sheet SIGRPBM011 Bent Main Gear
SIGRPFU011 Fuselage Kit SIGRPHP111 Hardware Pack-1
SIGRPHP1112 Hardware Pack-2 SIGRPBK011 Wing Kit
SIGRPWP111 Wire Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-banshee-kit-parts
CL-12
Buster
1975
Designed by: Mike Stott
Wingspan - 24"
Area - 140 Sq.In.
Length - 24.5"
Engine - .10-.15
The original Buster kit plan sheet, and other parts are available directly through the SIG website:
SIGKP012 Kit plan SIGDKM012 Decal sheet
SIGRPHP112 Hardware Pack SIGRPWP112 Wire Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-buster-kit-parts
CL-13
Shoestring
1975
Designed by: Mike Stott
Wingspan - 28.25"
Area - 150 Sq.In.
Length - 24.5"
Engine - .10-.15
The original Shoestring kit plan sheet and other parts are available directly through the SIG website:
SIGKP013 Kit plan SIGDKM013 Decal sheet
SIGRPHP113 Hardware Pack SIGRPWP113 Wire Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-shoestring-kit-parts
The original Deweybird kit plan sheet and other parts are available directly through the SIG website:
SIGKP015 Kit plan SIGRPBM015 Bent Main Gear
SIGDKM015 Decal sheet SIGRPHP115 Hardware Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-deweybird
Did you know?
The CL-16 kit was developed by Mike Stott from Maxey's RC Zlin (RC-23).
According to Steve Pohlmann, after SIG had the kit out in the marketplace, Glen (Sigafoos) asked Hank Pohlmann to convert one to RC. He did so, but it didn't perform to expectations. It had been hoped to market it as a cross-over kit, but Hank felt that it would need too many mods and thus defeated the purpose of the idea.
The original CL-16 Akrobat plan sheet and a 4-page instruction booklet are both available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
Original Beechcraft Staggerwing kit plan sheet and other parts are available directly through the SIG website:
SIGKP017 Kit plan SIGDKM017 Decal Sheet
SIGRPHP017 Hardware Pkg SIGSH017 Cowl
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-beechcraft-staggerwing-kit-parts
CL-19
Super Chipmunk
1973
Designed by: Mike Stott
Wingspan - 53.5"
Area - 570 Sq.In.
Length - 39"
Engine - .29-.40
Original Super Chipmunk instruction book and other parts are available directly through the SIG website:
SIGIB019 Instruction book SIGDKM019 Decal sheet SIGCK019 Canopy
SIGSH019 Cowl SIGRPBM019 Bent Main Gear SIGRPFU019 Fuselage Kit
SIGRPHP019 Hardware Kit SIGRPTS019 Tail Section SIGSH385 Wheel Pants
SIGRPBK019 Wing Kit SIGRPWP019 Wire Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/copy-of-sig-c-l-super-chipmunk-kit-parts
The original Super Chipmunk plan sheet is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
Original Akromaster kit plan sheet and canopy are available directly through the SIG website:
SIGKP020 Kit plan SIGCK020 Canopy
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-akromaster-kit-parts
CL-21
Mustang Stunter
1975
Designed by: Mike Gretz
Wingspan - 50"
Length - 37.5"
Area - 480 Sq.In.
Engine - .29-.40
The original Mustang instruction manual is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
Original Twister kit plan sheet and other parts are available directly through the SIG website:
SIGKP022 Kit plan SIGRPBM011 Bent Main Gear (part number IS correct)
SIGRPHP122 Hardware Pack SIGRPBK022 Wing Kit
SIGRPWP122 Wire Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-twister-kit-parts
Original Skyray kit plan sheet and other parts are available directly through the SIG website:
SIGKP023 Kit plan SIGDKM023 Decal sheet
SIGRPHP123 Hardware Pack
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-skyray-kit-parts
The original Skyray kit plan is also available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
The original plan sheet and instruction manual are available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
CL-25
Skyray-35
Designed by: Mike Pratt
Wingspan - 44"
Area - 296 Sq.In.
Length - 33"
Engine - .19-.35
Original Skyray-35 plan sheet and other parts are available directly through the SIG website:
SIGKP025 Kit plan SIGIB025 Instruction Book SIGDKM025 Decal sheet
SIGRPHP1251 Hardware Pack #1 SIGRPHP1252 Hardware Pack #2 SIGRPBN025 Nose Gear
https://sigmfg.com/collections/sig-c-l-kit-parts/products/sig-c-l-skyray-35-kit-parts
The original Skyray-35 plan sheet is also available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
Control-Line ARFs
The original Primary Force instruction book is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/
Kwik-Bilt Control-Line Kits
Berkeley Control-Line Kits
SIGBER134-CL
Lancer
original 1958
Originally designed by:
Arthur Pawloski
1958 AMA NATS Combat Winner
Wingspan - 39.5"
Wing Area - 358 sq.in.
Length - 26"
Engine - .15 - .35 glow or diesel
The original Lancer plan sheet is available for download in .pdf form - just click the link below to locate and download:
https://wanderings-ds-2.jimdofree.com/sig-c-l-plan-sheets-and-instructions/